IS-RDV3

Model Part Number Specifications Note  
Flask Clamp IS-A1 50ml    
IS-A2 100ml    
IS-A3 150ml    
IS-A4 200ml    
IS-A5 250ml    
IS-A6 500ml Made of polished stainless steel sheet. They can be fixed  
IS-A7 1000ml on any platform of all models of incubator shakers.  
IS-A8 2000ml    
IS-A9 3000ml    
IS-A10 5000ml    
IS-A50 25ml    
         
Model Part Number Specifications Note  
Test Tube Rack IS-A11 40xΦ14mm(0.55") Made of stainless steel and high grade ABS plastic material.  
IS-A12 40xΦ16mm(0.63") Compatible with all of Incubator Shaker  
IS-A23 40xΦ18mm(0.71")    
IS-A24 27xΦ22mm(0.87") Dimension External (WxDxH)  
IS-A42 21xΦ30mm(1.18") 262x112x140mm (10.31x4.41x5.51")  
       
       
       
       
       
       
         
Model Part Number Specifications Note  
Adjustable Test Tube Rack IS-A20 40xΦ14mm(0.55")
Made of stainless steel and high grade
 
IS-A21 40xΦ16mm(0.63") ABS plastic material. Compatible with all  
IS-A30 40xΦ18mm(0.71") of Incubator Shaker.  
IS-A31 27xΦ22mm(0.87") Dimension External (WxDxH):  
IS-A32 27xΦ30mm(1.81") 267x125x172mm (10.51x4.92x6.77")  
IS-A37   Made of stainless steel, rack for  
24xΦ30mm(1.81") 300mm long tubes.  
  Dimension External (WxDxH):  
  267x125x172mm (10.51x4.92x6.77")  
       
       
       
       
       
         
Model Part Number Specifications Note
Multifunction Spring Platform IS-A19 WxDxH:165x165x80mm For all shakers.
 
 
 
 
 
Made of stainless steel.
(13.78x9.45x3.15")
Can be fixed onto shaking platform.
IS-A27
WxDxH:350x240x80mm
 
(13.78x9.45x3.15")  
IS-A22
WxDxH:450x400x80mm
 
For all of incubator shakers
 
(17.72x15.75x3.15")
except IS-RSDA.
 
IS-A14
WxDxH:428x295x80mm
   
(16.85x11.61x3.15")    
IS-A39
WxDxH:720x440x80mm
For IS-RDS3,RDS4  
(28.35x17.32x3.15")  
IS-A48
WxDxH:840x440x80mm
For chest-type
 
(33.07x17.32x3.15")
incubator shakers
 
         
Model Part Number Specifications Note  
Fixture for Separating Funnel IS-A25
WxDxH:355x402x153mm
Used for separating funnel with volume 5000ml.  
(13.98x15.83x6.02")  
IS-A35 N/A Used for separating funnel with volume greater than 500ml.  
         
Model Part Number Specifications Note  
Infusion Bottle Clamp IS-A33 500ml Made of stainless steel.  
IS-A34 1000ml Can be fixed on all platforms of incubator shakers.  
         
Model Part Number Specifications Note  
Sticky Pad IS-A47 WxD: 140x140mm Use for all shaker, wipe with water,dry for few minutes,  
(5.51x5.51") the mat will be self-adhesive on surface.  
       
         
Model Part Number Specifications Note  
Rack for Stackable Incubator Shakers IS-A29 WxDxH: 948x630x225mm Support stackable incubator shakers (up to two units).  
(37.32x24.80x8.86")  
     
         
Model Part Number Specifications Note  
Flask Holder IS-A26 5000ml Hold 5000ml Flask. (For IS-RDS,IS-RDS3C, IS-RDH2, IS-RSH2)  
     
         
Model Part Number Specifications Note  
96-Well Microplate Holder IS-A13 WxD: 136x95mm Can be fixed on any platform of incubator shakers.  
(5.35x3.74")  
     
         
Model Part Number Specifications Note  
Universal Spring Platform WBA30 WxDxH: 370x240x180mm Previous Model: SY-2330-03A, Maximum Capacity:1  
(14.57x9.45x7.09")  
     
         
Model Part Number Specifications Note  
Deep Well Plate Clamp IS-A61 WxDxH: 780x450x84mm /  
(30.71x17.72x3.31")  
     

Enquire Now
Model IS-RDV3
Speed Range 30~300 rpm
Speed Precision ±1rpm
Orbit Diameter Φ26mm / 1.02"
Maximum Capacity 50mlx218 / 100mlx112 / 150mlx101 / 200mlx101 / 250mlx101 / 500mlx54 / 1000mlx35 / 2000mlx26
Platform Dimensions 530x890mm / 510x890mm
Number of Platforms 2Piece
Temp. Range Ambient -15℃~60℃ (Low Limit:4℃)
Temp. Sensitivity 0.1
Temp. Uniformity ±0.5℃(@37℃)
Automatical Defrost Yes
Display LCD
Timer 0~999 h
Dimension External (WxDxH) 1102x810x1458mm / 43.39x31.89x57.40"
Dimension Internal (WxDxH) 1000x590x800mm / 39.37x23.23x31.50"
Power <1300W 
Power Supply 220V, 60Hz
Weight 290 kg

-